Description
AEROX INDUSTRIES
Aftercooling and moisture separation
DryForce 400
Cool the air before it reaches the process.
The DryForce 400 combines fan assisted aftercooling, condensate collection and filtration for high flow compressed air systems. It reduces heat and separates bulk liquid moisture before downstream dryers, blasting equipment or pneumatic tools.
PURPOSE BUILT FOR YOUR WORK
Features that support the process
01
Remove heat
The aluminum cooling core and dual fans reduce compressed air temperature.
02
Collect condensate
A collection tank and high flow separator capture liquid water produced during cooling.
03
Condition downstream air
Fine filtration helps reduce particulate and oil aerosol carryover.
APPLICATIONS
Where it fits
Mobile compressors
Condition hot compressed air from suitable field compressor systems.
Blasting systems
Reduce the moisture load entering dry ice or abrasive equipment.
Industrial air treatment
Install ahead of appropriate dryers as part of a complete air system.
PRODUCT DETAILS
Specifications at a glance
| Maximum flow | 420 CFM |
|---|---|
| Maximum operating pressure | 232 PSI |
| Published continuous pressure range | 87–232 PSI |
| Power supply | 12V DC |
| Fan power | 95W total |
| Harness length | 15 ft |
| Inlet and outlet | 1 1/4 in FNPT |
| Particle filtration | Less than 3 microns, as listed |
| Dimensions, L × W × H | 28 × 20 × 27.5 in |
| Weight | Approximately 132 lb |
| Warranty | 1 year limited; exclusions and full terms apply |
PLAN THE RIGHT SETUP
Selection and operating notes
- Aftercooling removes heat and bulk condensate; it does not replace a dryer when a specific pressure dew point is required.
- Cooling and moisture separation depend on inlet temperature, ambient conditions, airflow and maintenance. No fixed removal percentage applies to every installation.
- Drain collected condensate and maintain filtration according to the service guidance. Confirm fittings and component ratings before connecting.
Reviews
There are no reviews yet.